These beautufully molded wing servo covers are light, low drag, and look good and are molded with a small bulge to allow thicker servos to be used. The bulge is approx 4 mm deep and allows servos up to 16 mm thick to be used, depending on the wing airfoil thickness.
The large shroud covers the servo output arm, clevis, and the control rod. This reduces the turbulence and improves performance measurably.
Supplied in pairs.
Kritka 1 Carbon Servo Covers (with bulge) Specification |
Thickness of carbon sheet |
0.37 mm |
Chordwise length inc shroud extension |
95 mm |
Chordwise length exc shroud extension |
60 mm |
Spanwise length |
59 mm |
Depth of servo bulge |
4 mm |
Distance of shroud from edge |
11 mm |
Thickness of shroud |
9 mm |
Height of shroud |
9.5 mm |
Weight |
3.4 g |
Trim to size to suit your application and attach with clear tape.